Wireless Access

Reply
Occasional Contributor II

Basic commands

I'm not able to run any of the 'show' commands in the user mode. Or I need to get into enable mode to run any commands:confused:

ArubaOS Version 3.4.0.8
Guru Elite

Enable

Yes, Enable it is:

Without enable mode, all you can do is:

(Aruba3000) >?
enable Turn on Privileged commands
exit Exit this session. Any unsaved changes are lost.
help Help on CLI command line processing and a
Description of the interactive help system
logout Exit this session. Any unsaved changes are lost.
ping Send ICMP echo packets to the specified ip address.
traceroute Trace route to the specified ip address.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: Basic commands

I got it. Thank you..!
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: