Wireless Access

Reply
Occasional Contributor II

Branch Config?

On our 7210 and 7220 controllers we see a branch smarch config but not on any of our other 7000 series controllers like 7005, 7010, 7030 etc. Curious of why that is if those are considered branch controllers, is it because Aruba doesn't want you to use anything but 7200 controllers to terminate branch controllers to?

Guru Elite

Re: Branch Config?

7200 series controllers are the "head-end" for BOC deployments. All
configuration is done on a 7200.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: Branch Config?

So you can't do zero touch provisioning of any 7000 series unless its to a 7200?

Guru Elite

Re: Branch Config?

For the BOC architecture, no.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: