Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Branch controller tunnel inside a 3rd party IPSEC tunnel

This thread has been viewed 1 times

  • 1.  Branch controller tunnel inside a 3rd party IPSEC tunnel

    Posted Nov 27, 2019 12:39 AM

    I want to add a branch 7008 controller that is managed by my VMM in HQ (both running AOS 8). The Branch and HQ use a 3rd party firewall with an IPSec tunnel to connect the sites. I do not want to try and setup a tunnel from the branch controller to a VPNC in HQ.  Is is possible to setup the controller IPsec tunnel between the MD and the MM inside of a 3rd party IPsec tunnel?Capture.JPG



  • 2.  RE: Branch controller tunnel inside a 3rd party IPSEC tunnel

    EMPLOYEE
    Posted Nov 30, 2019 12:44 PM

    hi cb732,

     

    from my point of view, if there is IP connectivity between the 7008 and the MM in your HQ, they will connect as they were on the same campus. 

     

    I do not see any problems with this setup. 

     

    BR

    Florian