Wireless Access

Occasional Contributor II

Branch reference design question

Hello - I am beginning on a pilot project to test Branch office connectivity on the Aruba platform.  I have 2x651's and a RAP-5WN in which to test this.  FYI - once 651 is master, the other a local.


I am following through he Validated reference design document, which might be old and leads me to my first question!


The document references RN-Code or remote network code base which appears to be 3.4 based.  Is this special code base really needed or should I configure it with 6.1 regular code base and ignore the RN-code references.


Its really unclear to me if I need to or if its just how the Architecture doc was designed. 




Re: Branch reference design question

The RN (Remote Networking) code is a legacy code.   In version 5.x and higher it has been merged with the core code train so you can ignore the RN designation. 

Systems Engineer, Northeast USA

Occasional Contributor II

Re: Branch reference design question

Thank you!

Search Airheads
Showing results for 
Search instead for 
Did you mean: