11-28-2011 12:50 PM
I am testing in my lab bridge mode, I have it working with .1q tagging the bridge traffic off port 0/0, but can I send the bridge traffic to port 0/1 but still use port 0/0 for management?
Solved! Go to Solution.
11-28-2011 12:59 PM
If you set the VLAN on the port (via the wired port profile), you can bridge WLAN clients to it by putting them in that same VLAN and they will be bridged out port 1.
This will work with port 1 in access or trunk mode (as long as the port carries the VLAN the user is in).