Bridge forwarding mode SSID clients only receiving DHCP from gateway which is the firewall at this location
Firewall is the gateway and DHCP it's tagged 251 to a Aruba 2920 layer 2 switch and AP 275 tagged 251
SSID has vlan 251
Eth 0 bridged forward - native 1, tagged 251 (same throughout the set up)
Clients connect get dhcp but have no access to anything else not even ping. did packet tracing and see things coming through but they are lost
Only Arp allowed
the switch sees the Mac addresses of the clients on the SSID the firewall also see the same.
Any thoughts???