- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
12-04-2018 05:31 PM
Hi All,
We currently have an error on our 7210 controllers running Aruba 8.3.0
Build String Mismatch - Image attached.
From what i first initially understand this is caused by a mismatch of VLAN's, the 160 VLAN in this situation is on both controllers. what else could be causing this error message?
Thanks,
Robert
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: Build String Mismatch - VLAN
12-04-2018 07:17 PM
All of the controllers in a cluster need to be running the exact same version of ArubaOS.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
Re: Build String Mismatch - VLAN
12-04-2018 07:36 PM
Thanks for the reply, both controllers are running ArubaOS 8.3.0.3.
image attached of #show version, same on both controllers.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator
12-10-2018 11:38 AM
this was an old error from when the controllers were rebooted during firmware upgrades. a reboot resolved the error but HPE support first got us to get the cluster into L2 mode as it was currently in L3 with the previous error.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Alert a Moderator