Wireless Access

New Contributor

CLI commands for AP 275

Trying to setup AP 275 with static ip thru CLI for a static IP envirenment . None of the old commands work ('setenv' or '?'). Is there a document available? Any help is appreciated.


apboot> printenv
Unknown command 'print' - try 'help'
apboot>setenv ipaddr
Unknown command 'setenvsetenv' - try 'help'



Guru Elite

Re: CLI commands for AP 275

You might want to open a TAC case. All of the apboot commands are working fine on my 275.



| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
New Contributor

Re: CLI commands for AP 275

Thanks for the reply.

New Contributor

Re: CLI commands for AP 275

I had flow control set to xon/xoff even though the terminal window opened and responded to 'Enter' command. I changed flow control to "none" and it started to work fine. TAC found the problem…



Search Airheads
Showing results for 
Search instead for 
Did you mean: