Wireless Access

Reply
Highlighted
Occasional Contributor II

Can I make different SSIDs per AP on the virtual controller.

Hi, I have a question. 

I would like to use IAP-207 for each floor.
The AP's total number is 22

I'm going to use a virtual controller
My question is, can I make different SSIDs per AP?
All APs are in the same vlan.

The reason for setting
Because the wireless LAN I used before It was a controller type and all AP used the same ssid.

By the way
There is a phenomenon that a user connects to another floor AP without connecting to the floor AP which the user belongs.

So this time , I want to make that the user is forced to access the AP on his floor.

I know it's passible if set it to standalone.
But I want to make the management convenience by the virtual control method.

 


Accepted Solutions
Highlighted
Occasional Contributor II

Re: Can I make different SSIDs per AP on the virtual controller.

I learned how to set it up easily by setting it directly.
Thanks for reading.

View solution in original post


All Replies
Highlighted
Occasional Contributor II

Re: Can I make different SSIDs per AP on the virtual controller.

I learned how to set it up easily by setting it directly.
Thanks for reading.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: