Wireless Access

Upcoming community maintenance Oct. 27th through Oct. 29th
For more info click here
Reply
Highlighted
Frequent Contributor II

Can't log into factory default IAP-215 AOS 8.6.0.2

Hi all,

 

I'm hoping I'm missing something trivial but I factory defaulted (used the reset button) an IAP-215 to AOS 8.6.0.2 but I can't seem to login. I performed the factory reset procedure before and after the upgrade and admin/admin isn't working. Any ideas what I could be missing?

 

Thanks!

-Ryan


Accepted Solutions
Highlighted
Super Contributor II

Re: Can't log into factory default IAP-215 AOS 8.6.0.2

Use admin as the username and the Serial Number as the password.

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX #509 | ACCX #1272 | ACSP | ACDA | ACEP | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!

View solution in original post


All Replies
Highlighted
Super Contributor II

Re: Can't log into factory default IAP-215 AOS 8.6.0.2

Use admin as the username and the Serial Number as the password.

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX #509 | ACCX #1272 | ACSP | ACDA | ACEP | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!

View solution in original post

Highlighted
Frequent Contributor II

Re: Can't log into factory default IAP-215 AOS 8.6.0.2

Thanks!! - This worked.

 

Of note, this runs contrary to Aruba's published (and very recently updated) documentation. Oy

Highlighted
Super Contributor II

Re: Can't log into factory default IAP-215 AOS 8.6.0.2

Here is a link showing the login process for the newer code APs

 

https://www.arubanetworks.com/techdocs/Instant_85_WebHelp/Content/instant-ug/prov-iap/login-to-iap-ui.htm

 

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX #509 | ACCX #1272 | ACSP | ACDA | ACEP | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!
Highlighted
New Contributor

Re: Can't log into factory default IAP-215 AOS 8.6.0.2

I have bought an used Aruba iap 215 rw . I reset it a few times an made configuration. After that, when I connected it to internet , it  Works  almost 1 minutes then it changes its config to different wifi name and I coundnt to connect it. How can I solve it.

SN: CK0265552

Thanks now

 

Highlighted
Contributor II

Re: Can't log into factory default IAP-215 AOS 8.6.0.2

You need to contact Aruba TAC.  The device was most likely assigned to a Central Account.

You may be required to show proof of purchase of the device.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: