Wireless Access

Reply
Occasional Contributor II

Can't move AP out of default group using MM

I built a fancy new AP group using my new single band SSIDs...  I provision my AP to use the new group,  the AP reboots and goes right back in to the default group.  Tips?

Re: Can't move AP out of default group using MM

Did you assign an AP system profile under the AP-Group with the LMS IP ?



Thank you

Victor Fabian

Pardon typos sent from Mobile
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II

Re: Can't move AP out of default group using MM

I went under campus APs, selected the AP changed the group and left the IP the same.

 

Looks like I can make changes under whitelist as well.

Occasional Contributor II

Re: Can't move AP out of default group using MM

Looks like I had to change it in the whitelist and then provision it for the new group

Contributor II

Re: Can't move AP out of default group using MM


@WiFivomFranManwrote:

I built a fancy new AP group using my new single band SSIDs...  I provision my AP to use the new group,  the AP reboots and goes right back in to the default group.  Tips?


I've this problem before, you can check regulation domain and make sure that your RD has support your ap type.

Occasional Contributor I

Re: Can't move AP out of default group using MM

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other. ShowBox VidMate Mobdro

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: