Wireless Access

Reply
Highlighted
Occasional Contributor II

Change Airwave IP on Controllers

Hi,

 

Is there a way to change the Airwave IP address on a 7205 controller? 

 

I'm running version 8.2.1.1 and the controllers inherited the config from a parent folder.

 

Thanks,
Sean

Highlighted
Guru Elite

Re: Change Airwave IP on Controllers

Can you change it at the parent folder?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: Change Airwave IP on Controllers

I'd have to turn it off on the parent folder, which would then turn off airwave monitoring for all controllers and AP's and then change the IP.  I was wondering if there was a way to change it once controller or cluster at a time.

Highlighted
Guru Elite

Re: Change Airwave IP on Controllers

Could you turn it off, push that command, then turn it on with the correct ip address?  Are you migrating Airwave servers or adding a new, different server?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: Change Airwave IP on Controllers

I am added a new one.

 

I csn't turn it off at the controller or cluster level, only at the parent folder level.


Thanks,

Sean

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: