Wireless Access

Reply
Highlighted
New Contributor

Change MTU size for controller-based Access Points

Due to the fact that I see a lot of messages like "port X-Excessive undersized/giant packets" in the logs I have to set the MTU to 1500.

 

Q: Can someone tell me how I can change the MTU size for controller-based Access Points?

 

Thanks in advance!

Guru Elite

Re: Change MTU size for controller-based Access Points

To answer your question: in the ap-group, there is an ap system profile.  The AP system profile has an mtu parameter that you can change to 1500 or less.

 

With that being said, access points do path MTU discovery every minute and that is the source of the "giants" that you see on the switchport.  The messages can be ignored, or you can statically configure the MTU as instructed above to make the messages stop.

 

Please see the articles here:  https://community.arubanetworks.com/t5/forums/searchpage/tab/message?advanced=false&allow_punctuation=false&q=giants for more information.

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: