Wireless Access

Reply

Change environmental variables in AP from static ip to dhcp

Anyone know what is the setenv command to remove a static ip from an ap and revert back to dhcp without doing a purge?


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Guru Elite

Re: Change environmental variables in AP from static ip to dhcp

setenv ipaddr

setenv netmask

setenv gatewayip 

save


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos

Re: Change environmental variables in AP from static ip to dhcp

Got it.  So just putting blank then.


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACCX #817, ACMP, ACMX #294
Guru Elite

Re: Change environmental variables in AP from static ip to dhcp

Yes.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: