Wireless Access

Reply
Occasional Contributor II

Change switchrole from standalone to MD

Hi,

 

I installed a standalone Virtual Mobility Controller.

Can I change its switch role from standalone to MD and then connect to Mobility Master?

 

Thank you!

Frequent Contributor II

Re: Change switchrole from standalone to MD

I think it may be cannot. Re-deploy is well.


Thank you,
Ratchapas S.
Land of Smiles
Frequent Contributor II

Re: Change switchrole from standalone to MD

Any news? 

 

We need change some Controllers from Stand Alone to MD in a MM as (new deploy no issue)...

 

I think that we need a CLI command that after executed ask by the full setup... something like:

 

Command:

"(ControllerStandAlone1) (config) # controller-convert-2-MD"

 Response starting full-setup wizard:

"************* Welcome to the Aruba7XXX setup dialog **************

This dialog will help to set the basic......

....

Enter System name [Aruba7XXX_XX_XX_XX]: 

...."

 

;-)

 

 

Thank you

 

 

Guru Elite

Re: Change switchrole from standalone to MD

Write erase all is the only way, really.

 

You can request the feature on the innovation site, but.....that activity does not happen in production often.  If it is not in production, then "write erase all" is what you need with a reboot.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: