Wireless Access

Reply
Occasional Contributor II

Changing from Master-Local to Master-Master CP doesn't work on the backup master

Hello Everyone!

 

So I am changing my current configuration to a Primary Master -Backup Master model  and the Captive Portal page doesn’t work when it fail it over to the back up. I realize the that the VLAN interface on the backup has a different IP and that is why it ti broken.

 

What is the best way to set this up? I am probably missing something obvious.

 

You comments would be appreciated!

 

C E

Guru Elite

Re: Changing from Master-Local to Master-Master CP doesn't work on the backup master

You need to set the ip cp-redirect-address to the ip address of the VLAN interface on that local controller:

 

http://community.arubanetworks.com/t5/Command-of-the-Day/COTD-ip-cp-redirect-address/td-p/236


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: