Wireless Access

Reply
Occasional Contributor II

Channel width selection

Hi all

 

How can I select the three channels in 2.4GHz to channel width of 40MHz?

Or only can I select one channel? (1, 6 or 11)

 

Regards

David

 

 

 

 

 

 

Guru Elite

Re: Channel width selection

Those settings are only for APS that are not using Adaptive Radio Management.

 

The Channel Width is controlled in the ARM profile under "Allowed Bands for 40mhz channels"  http://www.arubanetworks.com/techdocs/ArubaOS_6.4.4.x_WebHelp/Web_Help_Index.htm#ArubaFrameStyles/ARM/ARM_Profiles.htm?Highlight=Allowed bands for 40MHz channels

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: