Wireless Access

Reply

Checking 802.11 client type in Instant AP

Hi guys,

 

When checking the 802.11 client type in an Instant GUI I can see the following:

type.PNG

What are the options for the Type field? In the previous output Type is GN, but how can I discern if the client is G or N?

 

Regards,

Julián

Guru Elite

Re: Checking 802.11 client type in Instant AP

"a" means the client is connected to the 5ghz band
"g" means it is connected to the 2.4ghz band
"N" means it has connected at 802.11n rates (above 54)


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos

Re: Checking 802.11 client type in Instant AP

Hi Colin,

 

But in the previous output Type is GN, but how can I discern if the client is G or N?

And if my client is AC, would I see AC or just A?

 

Regards,

Julián

Re: Checking 802.11 client type in Instant AP

Hi there,

 

Any ideas?

 

Regards,

Julián

Re: Checking 802.11 client type in Instant AP

Hi Colin,

 

Then do you know how can I discern if the client is G or N if the Type shown is GN?

Captura.PNG

 

Regards,

Julián

Guru Elite

Re: Checking 802.11 client type in Instant AP

It is an N client.  G or A just indicates the band.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos

Re: Checking 802.11 client type in Instant AP

Hi Colin,

 

Got it! Many thanks :)

 

Best regards,

Julián

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: