Wireless Access

Frequent Contributor II

Clearpass Upgrade from 6.2.5 to 6.3


I can't get 6.3 installed on the proper SCSI0:1 partition, no idea how the install proccess is taking the hard disk and this is the second time 6.3 has been installed on SCSI0:0 so after 1 or 2 days I will have low disk warnings because of the space. Right now my VM Admin has sized the server with the following disks:

SCSI0:0 with 15G

SCSI0:1 with 500G

SCSI0:2 with 250G

SCSI0:3 with 500G

This is really a mess but before I delete partitions I want to have only 0:0 and 0:1. I don't want to re-install the server from scratch as I'm depenign on diferent teams to have it fully operational so I'm trying to get it ready on 6.3 to then join it into my cluster.


[appadmin@eu-cppm1]# system boot-image -l

PolicyManager on SCSI (0:2)
Aruba ClearPass [Active] on SCSI (0:0)



Alsom I got the below output from my mem-ino.txt from the log of the server.


Partition labels:
/dev/sda1: LABEL="/boot" UUID="551e82f3-6d7f-496c-a512-1343f428593e" TYPE="ext4"
/dev/sda2: LABEL="/image1-old" UUID="bcbb61c7-28da-4177-84d5-503dbab84c38" TYPE="ext4"
/dev/sda3: UUID="92704078-02ef-42ee-9018-cd69ff879911" TYPE="swap"
/dev/sda5: LABEL="/dummy-second" UUID="cfcdbf4f-03e2-450f-9189-a649d1c076fe" TYPE="ext4"
/dev/sda6: LABEL="/shared" UUID="2fb4bd25-a3e7-4cbe-ad5b-41b7ebc1168a" TYPE="ext4"
/dev/sdc1: LABEL="/image2-old" UUID="7172f79d-7a25-48da-aa41-f7fc65e8ed4d" TYPE="ext3" SEC_TYPE="ext2"
/dev/sdb1: LABEL="/image1" UUID="2c19d021-93ef-47bf-84f4-33cffd1bb3a2" TYPE="ext4"
/dev/sdb2: LABEL="/image2" UUID="fe34b1f2-663d-4b9a-a041-eac6976e6d10" TYPE="ext4"



Thank yo very much in advance for your support.



Re: Clearpass Upgrade from 6.2.5 to 6.3

Please open up a case.  Our TAC has assisted many customers with this upgrade.  

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
If you found my post helpful, please give kudos