Wireless Access

Hello together,

I currently have a strange problem with my new AOS 8.2.0.2 infrastructure. I have a wireless client behind a AP which is connected to a Virtual Mobility Controller. The client can connect to the SSID and gets without  problems all DHCP information.

But when I now try to ping the given default gatway on this client, I can't reach them.From the  virtual controller I can reach the gateway.

I already create a packet capture on the controller and saw this

#show packet-capture datapath-pcap

14:58:24.316589 IP 10.217.12.28 > 10.104.47.248: GREv0, length 82: gre-proto-0x8210
14:58:24.316597 ARP, Request who-has 10.104.37.254 tell 10.104.36.6, length 28
14:58:24.632451 ARP, Request who-has 10.104.36.6 tell 0.0.0.0, length 46
14:58:24.632465 IP 10.104.47.248 > 10.217.12.28: GREv0, length 100: gre-proto-0x8210
14:58:24.922407 IP 10.217.12.28 > 10.104.47.248: GREv0, length 82: gre-proto-0x8210
14:58:24.922413 ARP, Reply 10.104.36.6 is-at 80:19:34:91:aa:af, length 28
14:58:26.675465 IP 10.217.12.28 > 10.104.47.248: GREv0, length 82: gre-proto-0x8210
14:58:26.675479 ARP, Request who-has 10.104.37.254 tell 10.104.36.6, length 28

I have the follwing setting on the virtual-ap

Virtual AP profile "MY-PROFILE"
-----------------------------
Parameter                                       Value
---------                                       -----
AAA Profile                                     MY-PROFILE
802.11K Profile                                 default
Hotspot 2.0 Profile                             N/A
Virtual AP enable                               Enabled
VLAN                                            300
Forward mode                                    tunnel
SSID Profile                                    MY-PROFILE
Allowed band                                    all
Band Steering                                   Disabled
Cellular handoff assist                         Disabled
Openflow Enable                                 Enabled
Steering Mode                                   prefer-5ghz
Dynamic Multicast Optimization (DMO)            Disabled
Dynamic Multicast Optimization (DMO) Threshold  6
Drop Broadcast and Multicast                    Disabled
Convert Broadcast ARP requests to unicast       Enabled
Authentication Failure Blacklist Time           3600 sec
Blacklist Time                                  3600 sec
Deny inter user traffic                         Disabled
Deny time range                                 N/A
DoS Prevention                                  Disabled
HA Discovery on-association                     Enabled
Mobile IP                                       Enabled
Preserve Client VLAN                            Disabled
Remote-AP Operation                             standard
Station Blacklisting                            Enabled
Strict Compliance                               Disabled
VLAN Mobility                                   Disabled
WAN Operation mode                              always
FDB Update on Assoc                             Disabled
WMM Traffic Management Profile                  N/A
Anyspot profile                                 N/A

I'm also not able to ping from the controller to the wireless client.

Has someone a idea?

Thanks for your help!!!

Best regards Torben

No idea?

Best regards

Torben

Did you follow the Virtual Appliance Deployment Guide here?  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=28637

Hello cjoseph,

yes we have set this settings but this seems not the problem.

Best regards

Torben

Sorry to dig up an old thread, but did you ever find a solution to this? We are having a very similar issue in our environment. I have a TAC Case open, but not much progress has been made. Was wondering if there is anything I should be looking at?

Thanks,
Chris

I have exactly the same issue ,

has anyone been able to fix?

Are you also running 8.2.0.2? What version of VMware?