Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Client VS AP Radio PHY

This thread has been viewed 2 times

  • 1.  Client VS AP Radio PHY

    Posted Dec 04, 2018 01:05 PM

    Does anyone know if it is normal to have a Client on 20 MHz VHT, while the AP is on 40 MHz VHT?

    I have a client on an isolated AP and SSID that is getting rediculous client retransmits like it can easily be well over 100% , it makes it so the network is basically useless. The SNR is 51 DB as the client is like 15 feet max from the AP and has direct line of sight.  Just trying to figure out why this has such a high retransmit rate.


    Thanks



  • 2.  RE: Client VS AP Radio PHY

    EMPLOYEE
    Posted Dec 04, 2018 01:28 PM
    What is the client? What type of encryption are you using on that SSID?


  • 3.  RE: Client VS AP Radio PHY

    Posted Dec 04, 2018 01:44 PM

    It's a Roku device, and the SSID is using wpa-2 Personal.



  • 4.  RE: Client VS AP Radio PHY

    EMPLOYEE
    Posted Dec 04, 2018 01:58 PM
    Is it on the 2.4ghz or 5ghz band?


  • 5.  RE: Client VS AP Radio PHY

    Posted Dec 04, 2018 05:30 PM

    5Ghz  band. 



  • 6.  RE: Client VS AP Radio PHY

    EMPLOYEE
    Posted Dec 04, 2018 08:32 PM
    I would use the commandline and is the "show AP association client-mac <clientac address>. It will provide more objective information than the GUI.