Wireless Access

Reply
Occasional Contributor I

Client did not complete EAP transaction

We are testing failover to the secondary radius server with clearpass

when failover to the secondary radius server, 802.1x was not successful and went to mac authentication
error in clearpass show - Client did not complete EAP transaction

we set this secondary server as the primary server with no backup no problem is seen

Guru Elite

Re: Client did not complete EAP transaction

Did you issue a radius server certificate to BOTH the primary and backup radius server?

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Client did not complete EAP transaction

Hi Joseph,

 

Thank you for the information. I am sorry but did not understand what is "radius server certificate". How i can do that? thanks


cjoseph wrote:

Did you issue a radius server certificate to BOTH the primary and backup radius server?

 

 




Guru Elite

Re: Client did not complete EAP transaction

You said you are testing failover to the secondary radius server.  Do you mean failover to the secondary controller?

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: