Wireless Access

Reply
Occasional Contributor I

Client total connection time

Good Morning all

We have 7210 controller - OS 6.3.1.21, 278 AP225s, CPPM 6.6

 

I have been asked by my supervisor for "total connection time" per user or client device.

 

Is there a way from the information on gui for the controller to find this out?

Any one know a CLI command for controller or CP to get this?

Is there a report in CP that can generate this information ?

 

Thank you in advance for your time and attention

Guru Elite

Re: Client total connection time

Do you have AirWave? 

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor I

Re: Client total connection time

Yes

Guru Elite

Re: Client total connection time

Take a look at the client session report. You can also customize and create your own reports. 

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: