Wireless Access

Reply
Highlighted
Trusted Contributor I

ClientMatch - Is it 802.11ac only

Pretty simple question: will ClientMatch only work if the client is 802.11ac?

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.

Accepted Solutions
Highlighted
Moderator

Re: ClientMatch - Is it 802.11ac only

ClientMatch is a part of ARM 3.0 which is available in 6.3. As long as the AP is supported by the code, you should have ClientMatch functionality. (Pre-N APs will not support ClientMatch)



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post


All Replies
Highlighted
MVP Expert

Re: ClientMatch - Is it 802.11ac only

I might be wrong (nothing new) believe is a 6.3 feature
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Trusted Contributor I

Re: ClientMatch - Is it 802.11ac only

That's what I'm thinking, but it wasn't clear from the videos I watched.  Shouldn't require 802.11ac APs then either, right?

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Highlighted
Moderator

Re: ClientMatch - Is it 802.11ac only

ClientMatch is a part of ARM 3.0 which is available in 6.3. As long as the AP is supported by the code, you should have ClientMatch functionality. (Pre-N APs will not support ClientMatch)



If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

View solution in original post

Highlighted
Aruba Employee

Re: ClientMatch - Is it 802.11ac only

It is a 6.3 feature, but it does not require 802.11ac APs.  This will work across all 802.11n capable APs as well.  There is no support for client match on legacy a/b/g APs (AP-65s, AP-70s,etc).

Highlighted
Trusted Contributor I

Re: ClientMatch - Is it 802.11ac only

Perfect!  Thanks everyone.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Highlighted

Re: ClientMatch - Is it 802.11ac only

so even the small rap3 instant will work with the client match? :)

----------------------------------------------------
Project engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: