Wireless Access

Reply
Highlighted
Trusted Contributor I

ClientMatch - Is it 802.11ac only

Pretty simple question: will ClientMatch only work if the client is 802.11ac?

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.

Accepted Solutions
Highlighted
Moderator

Re: ClientMatch - Is it 802.11ac only

ClientMatch is a part of ARM 3.0 which is available in 6.3. As long as the AP is supported by the code, you should have ClientMatch functionality. (Pre-N APs will not support ClientMatch)


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post


All Replies
Highlighted
MVP Expert

Re: ClientMatch - Is it 802.11ac only

I might be wrong (nothing new) believe is a 6.3 feature
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Trusted Contributor I

Re: ClientMatch - Is it 802.11ac only

That's what I'm thinking, but it wasn't clear from the videos I watched.  Shouldn't require 802.11ac APs then either, right?

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Highlighted
Moderator

Re: ClientMatch - Is it 802.11ac only

ClientMatch is a part of ARM 3.0 which is available in 6.3. As long as the AP is supported by the code, you should have ClientMatch functionality. (Pre-N APs will not support ClientMatch)


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

View solution in original post

Highlighted
Aruba Employee

Re: ClientMatch - Is it 802.11ac only

It is a 6.3 feature, but it does not require 802.11ac APs.  This will work across all 802.11n capable APs as well.  There is no support for client match on legacy a/b/g APs (AP-65s, AP-70s,etc).

Highlighted
Trusted Contributor I

Re: ClientMatch - Is it 802.11ac only

Perfect!  Thanks everyone.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Highlighted

Re: ClientMatch - Is it 802.11ac only

so even the small rap3 instant will work with the client match? :)

----------------------------------------------------
Project engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: