Thanks,
In the RF Dashboard section I see
All access points - utilization, noise and errors with only 1 green bar at the bottom of each.
In RF advanced, ARM, I see
Band steering mode - prefer 5GHz
Airtime fairness - fair access
Client match - enabled
CM Calculating interval 3 sec
CM neighboring match 75%
CM threshold 5
SLB mode Channel,
min transmit 3
Max 21
Client Aware disabled
Scanning Enabled
Wide Channel bands and my choices are 5GHz, none, all, 2.4GHz
I have 80MHz support and my choices are disabled, enabled
RADIO
2.4GHz band
legacy only diabled
802.11d/802.11h disabled
beacon interval 100ms
Interference immunity level 2
Channel switch announcement 0
Background spectrum monitoring disabled
Custom Arm power range (unchecked)
5GHz band
legacy only disabled
802.11d/802.11h disabled
beacon interval 100ms
Interference immunity level 2
Channel switch announcement 0
Background spectrum monitoring disabled
Custom Arm power range (unchecked)