Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Cluster with stanalone GRE L2

This thread has been viewed 4 times

  • 1.  Cluster with stanalone GRE L2

    Posted Feb 04, 2020 03:31 AM

    we have two DMZ vrrp controller

     

    MM-MC cluster at datacnetre

     

     

    if need to seprate the gest traffic and redirect it to DMZ controller

     

    what is needed as i created GRE L2 and it's up, But what will be the next action??



  • 2.  RE: Cluster with stanalone GRE L2

    Posted Feb 04, 2020 08:31 AM

    This seems to be an ideal environment to use Multizone. Check out the following link.

     

    https://community.arubanetworks.com/t5/Wireless-Access/How-to-Configure-Multizone/td-p/481727

     

    I hope this helps,



  • 3.  RE: Cluster with stanalone GRE L2

    Posted Feb 04, 2020 10:42 AM

    totally agree with you But unfortonattly ,

     

    we don't have aRFP licence for 4000 AP as it's a centralized soultion for big envirnment as we have

     

    2 x 10K

    4 x 7280

     

    and 2x 7280 for guest at DMZ



  • 4.  RE: Cluster with stanalone GRE L2

    EMPLOYEE
    Posted Feb 12, 2020 12:17 AM

    Hi ehab.boshra,

     

    if you have the GRE tunnel running you also have selected a VLAN going through the GRE tunnel. On your SSID, you simply need to select this VLAN for the clients and they will be tunneled through the GRE tunnel.