Wireless Access

Hi all,

 

Currently I configured an IAP 103 and IAP 204 on the same network but on my virtual controler i can't see the IAP 103, I see IAP103 has not the same firmware but when i tried to change the firmware (same that IAP204) i cannot migrate firmware.

 

Do you know a solution for me?

 

Thank you in advance.

 

Best regards

chabin972

Before you join it to the cluster you need to make sure both IAPs are on the same firmware version

Thanks for your reply, it's one of my problem I can't make the same firmware of 204 on my 103, When I tried to make the firmware update the action is ok but the firmware doesn't change.

I Will Check again tomorrow

Chabin_972,

 

Here is what you do:

 

Obtain the same version of code for both 103 and 204 here:  http://support.arubanetworks.com/LifetimeWarrantySoftware/tabid/121/DMXModule/661/EntryId/20388/Default.aspx

 

Reset the 103, and upgrade the firmware manually.  Do the same thing with the 204 separately.  Reset the 103 and introduce it to the same subnet as the 204 and see if it joins the cluster with the 204.

 

had the same problem with an 205 and a 103. firware update solves the issue


#AirheadsMobile