Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Connecting partner site through RAP - need help on NAT

This thread has been viewed 0 times

  • 1.  Connecting partner site through RAP - need help on NAT

    Posted Jan 13, 2013 11:55 AM

    Hi,

     

    I am trying to work out how I can use a RAP to connect a Business Partner (BP) site to us through a RAP.  The Business partner network must appear to us as a particular subnet (10.100.x.x) so I need to be able to do the NAT on the RAP.  I also, ideally, would need a NAT pool for PC's and a static NAT for devices that have static IP's (such as printers).  The topology is below, I would appreciate any help.

     

    Note:  The BP cannot do NAT themselves

     

    BP LAN (172.18.100.0) >>>BPFirewall >>>  RAP >>VPN>>  Aruba Controller in our datacentre >>> Switch >>> Data servers (212.1,x,x).

     

    Thanks