Hi All,
I have a controller that's failing to boot after the initial setup. It's hanging at "Reading configuration from default.cfg"
Here's the output from the initial setup. Note the MYSQL message!
System name: Aruba7210
Switch Role: master
VLAN 1 interface IP address: 172.16.0.254
VLAN 1 interface subnet mask: 255.255.255.0
Option to configure VLAN 1 interface IPV6 address: no
Country code: GB
Time Zone: GMT-0:0
Ports shutdown: no
If you accept the changes the switch will restart!
Type <ctrl-P> to go back and change answer for any question
Do you wish to accept the changes (yes|no)yes
Creating configuration...Failed to initialize mysql connection.. Continuing.
Done.
System will now restart!
Shutdown processing started
Syncing data...done.
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Here's where it hangs...
Aruba Networks
ArubaOS Version 6.4.2.3 (build 47524 / label #47524)
Built by p4build@minorca.arubanetworks.com on 2014-12-06 at 10:15:29 PST (gcc version 4.4.5)
Copyright (c) 2002-2014, Aruba Networks, Inc.
<<<<< Welcome to Aruba Networks - Aruba A7210 >>>>>
Probing for EEPROM devices [ OK ]
Probing for real-time clock [ OK ]
Initializing LCD module [ OK ]
Uncompressing core image files [ OK ]
Extracting corefs [ OK ]
Enabling watchdog [ OK ]
Starting device manager [ OK ]
Performing eUSB Flash fast test... [ DONE ]
Checking for file system... [ OK ]
Mounting flash [ OK ]
Installing ancillary FS [ OK ]
Performing integrity check on ancillary partition 0 [ OK ]
Reboot Cause: Power Cycle (Intent:cause:register ee:ee:1)
Starting syslog service [ OK ]
Restoring the database [ OK ]
Generating SSH keys [ OK ]
Initializing TPM and certificates [ OK ]
Checking for configuration upgrade [ OK ]
Starting OS services [ OK ]
Reading configuration from default.cfg
Any recommendations?
I can get to cpxload prompt but can I reset the controller from there?
Cheers
James