Wireless Access

Reply
Contributor I

Convert IAP to RAP error

I am trying to convert my RAP3 from instant to a RAP.

 

I am running 6.1.3.6 on the controller and just updated the IAP to the most recent

 

I am getting this error from show log security 30

 

May 20 09:59:12 :133019: <ERRS> |localdb| User BF0018856::00:0b:86:82:e7:fd was not found in the database
May 20 09:59:12 :133006: <ERRS> |localdb| User BF0018856::00:0b:86:82:e7:fd Failed Authentication

 

But I see it in the database 

show local-userdb-ap

00:0b:86:82:e7:fd  default   00:0b:86:82:e7:fd                                           Provisioned                    Fri May 17 09:45:23 2013  Yes      0.0.0.0

 

 

??????


Accepted Solutions
Highlighted
MVP Expert

Re: Convert IAP to RAP error

 

You need 6.2 or 6.1.4.x on your controller to support the RAP3s

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

View solution in original post


All Replies
Highlighted
MVP Expert

Re: Convert IAP to RAP error

 

You need 6.2 or 6.1.4.x on your controller to support the RAP3s

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

View solution in original post

Highlighted
Occasional Contributor I

Re: Convert IAP to RAP error

what is the code versopn on your controller becuase we need  AOS 6.1.4.1 to bring up RAP-3 on the controller

Highlighted
Contributor I

Re: Convert IAP to RAP error

Any thing I should know about before goint to to 6.1.4?  Unfortunaletly my controller is a 3200 without the mem upgrade so 6.2 is not a possibility.

 

Thanks

 

Highlighted
MVP Expert

Re: Convert IAP to RAP error

 

You should read the 6.1.4.x release notes in the Aruba support site

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
New Contributor

Re: Convert IAP to RAP error

I get the same problem Converting IAP to CAP on AOS 6.3.1.5

 

Jul 15 13:45:00  localdb[1630]: <133006> <ERRS> |localdb|  User 18:64:72:ce:a4:10 Failed Authentication
Jul 15 13:45:09  localdb[1630]: <133006> <ERRS> |localdb|  User 18:64:72:ce:9c:43 Failed Authentication
Jul 15 13:45:09  localdb[1630]: <133006> <ERRS> |localdb|  User 18:64:72:ce:9c:43 Failed Authentication

(GA-2462-DO-WCTRL) (config) #show ver
Aruba Operating System Software.
ArubaOS (MODEL: Aruba3200-US), Version 6.3.1.5
Website: http://www.arubanetworks.com
Copyright (c) 2002-2014, Aruba Networks, Inc.
Compiled on 2014-04-08 at 20:23:43 PDT (build 43118) by p4build

ROM: System Bootstrap, Version CPBoot 1.3.1.0 (build 35189)
Built: 2012-09-06 16:05:33
Built by: p4build@re_client_35189

Highlighted
Guru Elite

Re: Convert IAP to RAP error


scot.bell@fmcna.com wrote:

I get the same problem Converting IAP to CAP on AOS 6.3.1.5

 

Jul 15 13:45:00  localdb[1630]: <133006> <ERRS> |localdb|  User 18:64:72:ce:a4:10 Failed Authentication
Jul 15 13:45:09  localdb[1630]: <133006> <ERRS> |localdb|  User 18:64:72:ce:9c:43 Failed Authentication
Jul 15 13:45:09  localdb[1630]: <133006> <ERRS> |localdb|  User 18:64:72:ce:9c:43 Failed Authentication

(GA-2462-DO-WCTRL) (config) #show ver
Aruba Operating System Software.
ArubaOS (MODEL: Aruba3200-US), Version 6.3.1.5
Website: http://www.arubanetworks.com
Copyright (c) 2002-2014, Aruba Networks, Inc.
Compiled on 2014-04-08 at 20:23:43 PDT (build 43118) by p4build

ROM: System Bootstrap, Version CPBoot 1.3.1.0 (build 35189)
Built: 2012-09-06 16:05:33
Built by: p4build@re_client_35189


Add that mac address to the controller's whitelist.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: