Wireless Access

Reply
Highlighted
Occasional Contributor II

Converting Instant config to Controller based config?

Hi All,

 

I wondering about is there a Tool from Aruba that helps the transformation of an Instant system to a controller based system?

 

I need to build the exact same confguration on the mobility controller that runs on Instant Virtual Controller (with many wlans, dynamic vlans, lots of auth servers and specified radio settings).

 

Thanks!

Guru Elite

Re: Converting Instant config to Controller based config?

There is no tool that I am aware of.

 

Consider building it from scratch to obtain a clean configuration on the controller side.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Re: Converting Instant config to Controller based config?

I started to build a configuration from zero.

 

I thought one question was worth it. :)

Guru Elite

Re: Converting Instant config to Controller based config?

Absolutely worth it.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: