Wireless Access

Reply
Highlighted
Contributor II

Re: Converting the IAP to campus AP

Hi Glaznz,

 

First I have connected all my IAP to a layer3 PoE switch and attach a dhcp server with 2 DHCP scopes configured on it (VLAN1:192.168.1.X and VLAN5:192.168.5.X). After my IAPs booted up and appeared under one virtual controller, I converted them to campus AP.

 

While they were booting up again I have changed all access ports on the switch to vlan 5 were my APs are connected, knowing that dhcp of VLAN 5 is configured as the following link https://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Content/ArubaFrameStyles/DHCP_Option_43/Windows_Based_DHCP_Serve.htm#dhcp_option_43_3357486196_1050520

Approximately after 15 minutes campus APs will appear on your controller, so you can provision them.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: