Wireless Access

Reply
Highlighted
Occasional Contributor I

Custom Captive Portal - user stuck in guest-logon role

Hi,

 

I configured custom captive portal for 7210 Mobility controller. When user associate with SSID testgest, he is redirected to my custom CP but after submit, Captive portal page is opened again and again. And sh user-table essid testgest shows that user is stiil in testgest-guest-logon role.

 

I attached HTML file, CP profile and log from controller.

 

please, can someone help?

Regards,

Mario

Guru Elite

Re: Custom Captive Portal - user stuck in guest-logon role

I don't know HTML, but please use the article here:  http://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-I-create-a-custom-Captive-Portal-for-public-access/ta-p/177854 as a starting point for your HTML.  You must send back a username with an email address for it to work:

 

Screenshot 2018-08-28 at 05.10.50.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor I

Re: Custom Captive Portal - user stuck in guest-logon role

Thanks, I overviewed that I need to have user/pass even if I want to hide it.

 

 

Guru Elite

Re: Custom Captive Portal - user stuck in guest-logon role

Just the username with an @ is all that is needed.  Password is not necessary with the Captive Portal authentication profile set to "guest login".


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: