Wireless Access

Reply
Contributor I

Custom EIRP values per AP group?

Hello all,

 

On our network I have created and AP group based on a physical building or location. I would like to customize radio settings, such as EIRP values for ARM, on a per building/location basis. When doing this for one buidling AP group it changes it for the whole network. Is there a way to do this without having to laboriously configure each AP individually in the "AP Specific" tab?

 

Any advice would be much appreciated

 

Highlighted
Guru Elite

Re: Custom EIRP values per AP group?

For ap-group, you would have to first save a copy of the radio profile, and then save a copy of the ARM profile under that. You can then apply the copied radio profile and the copied ARM profile under that to a different AP group.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: