Wireless Access

Reply
Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

What information is required to create the  master redundancy and data synchronization ?

 

Can you please mentioned the steps to create the master redundancy ?

 

your cooperation in this regard will be highly admirable.

 

looking forward.

Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

What information is required to create the master redundancy and data synchronization ?

 

Can you please mentioned the steps to create the master redundancy ?

 

your cooperation in this regard will be highly admirable.

 

looking forward.

Guru Elite

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

Dear joseph 

 

for master redudancy we have configured th vrrp according to the steps mentioned in the link provided by you. But still the output is same. :(

 

 

Guru Elite

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

The key is to execute this, first on the master:

 

config t

master-redundancy vrrp <vrrp id>

peer ip address <backup master>

master-ip <backup master>  ipsec <key>

 

 

Then execute on the backup master

 

config t

master-redundancy vrrp <vrrp id>

peer ip address <master>

master-ip <master>  ipsec <key>

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

Please find the below snapshots

 

1.jpg

 

2.jpg

 

3.jpg

4.jpg

 

 

5.jpg

 

6.jpg

Guru Elite

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

You should remove the master-redundancy configuration from the backup and re-apply it.  It is saying that the master ip address is the VRRP address and not the master's ip address.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

Can you please explain.... On the backup controller what changes are required ?

 

 

Guru Elite

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

Please open a TAC case about this.  I want to make sure you are not running into a bug.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

You are requested to please fill my configuration.

 

Master controller vlan 20 ip 10.20.0.1

Backup controller vlan 20 ip 10.20.0.2

VRRP 20  ip address 10.20.0.3

Key abc@2015

 

 

config t

master-redundancy vrrp <vrrp id>

peer ip address <backup master>

master-ip <backup master>  ipsec <key>

 

 

Then execute on the bakcup master

 

config t

master-redundancy vrrp <vrrp id>

peer ip address <master>

master-ip <master>  ipsec <key>

 

 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: