Wireless Access

Reply
Guru Elite

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

On the backup master:

 

config t

master-redundancy

no master-vrrp 

no peer-ip address

master-vrrp 20

peer-ip-address 10.20.0.1 ipsec abc@2015

 

If that does not work, please try using a key that does not have an @ sign.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

According to your guidance I matched all the steps with my current configuration. I also changed the key but the outcome is negative.

 

 

Moderator

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

hi

please run the following two commands on the backup controller and paste here:

 

show process monitor statistics

show processess | include db,mys

show log error | include dbsync

 

you may be hitting known bug 116628, the output from the above commands will allow me to confirm it

 

regards

-jeff

 

Regular Contributor I

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

Please note your desired information in the attached file naming  ""Logs"".

 

 

 

 

 

Guru Elite

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

Please open a support case so that you can get help.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Moderator

Re: Database syc failed between Master and Master-Standby. VRRP working !!!

+1 to what Colin just mentioned, time for a support case - the logs attached do not show any match with the known issue, so something else is going on.

Guru Elite

Re: Database syc failed between Master and Master-Standby. VRRP working !!!


@Ruheal Maqsood wrote:

According to your guidance I matched all the steps with my current configuration. I also changed the key but the outcome is negative.

 

 


It looks like the keys in your VRRP 20 are mismatched:

 

Invalid advertisement received for VRID 20, Mismatched authentication type

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: