Wireless Access

Frequent Contributor I

Design Considerations- Best Practices for AP groups

I am about to span an AP group between two physical sites. Wondering if that is a proper thing to do. 

Site 1 and Site 2 link to a central office via WAN where the controllers are located. AP's are in tunnel mode.  No special configuration for the site is needed, simply matching the other AP's config would suit our needs. Is there anything about AP groups which binds them to a single subnet?



Guru Elite

Re: Design Considerations- Best Practices for AP groups

That is fine.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
Showing results for 
Search instead for 
Did you mean: