Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Disabling IPv6 on legacy RAP

This thread has been viewed 3 times

  • 1.  Disabling IPv6 on legacy RAP

    Posted Jan 09, 2017 04:05 AM

    Is there a way to disable IPv6 on RAPs? A customer is using the RAPs behind a DualStack Lite and is receiving log messages at the controller.

    The logging level is set to warning. 

     

    rdnssd[1138]: 0: 2a02:128:3:5::1 expires at 1993300


  • 2.  RE: Disabling IPv6 on legacy RAP

    Posted Jan 13, 2017 03:44 AM

    no ideas?



  • 3.  RE: Disabling IPv6 on legacy RAP

    EMPLOYEE
    Posted Jan 13, 2017 06:34 AM

    There is no way to disable ipv6 on a RAP.  There is not much ipv6 traffic there, though.



  • 4.  RE: Disabling IPv6 on legacy RAP

    Posted Jan 13, 2017 07:08 AM

    The problem is that the RDNSSD log message is flooding the controller log.



  • 5.  RE: Disabling IPv6 on legacy RAP

    EMPLOYEE
    Posted Jan 13, 2017 07:10 AM

    What version of ArubaOS is this?  You should open a case with TAC so that they can determine why this is happening with your setup.



  • 6.  RE: Disabling IPv6 on legacy RAP

    Posted Jan 13, 2017 08:32 AM

    The version is 6.4.4.10 on a 3200XM



  • 7.  RE: Disabling IPv6 on legacy RAP
    Best Answer

    EMPLOYEE
    Posted Jan 13, 2017 09:13 AM

    It is a cosmetic message that is fixed in 6.5.0.0 (bug 125997).  The message should only show up when debugging is configured.  Unfortunately it was not backported to 6.4.4.x. 



  • 8.  RE: Disabling IPv6 on legacy RAP

    Posted Jan 13, 2017 09:15 AM

    Thank you! This is really bad, because 6.5 isn't supported for the 3200XM afaik



  • 9.  RE: Disabling IPv6 on legacy RAP

    Posted Jan 17, 2017 03:47 AM

    Opened a case to check if this bug will be fixed in 6.4.4.x. 

     

    Thank you!