Hi,
There can one reason, check the ap's regulatory domain profile that you have mapped,
I just replicated your issue and here is the output,
(Aruba3200) #show ap database
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
24:de:c6:c3:96:21 TestLab 105 172.16.10.150 Up 1h:50m:11s 172.16.0.254 0.0.0.0
24:de:c6:c6:36:e4 default 135 172.16.10.4 Down 172.16.0.254 0.0.0.0
9c:1c:12:cb:12:02 TestGP RAP-109 10.1.1.12 Up 14m:39s Rc2E 172.16.0.254 0.0.0.0
I believe issue is also same as highlighted.
Put the following command and check the country code that you have selected.
in this example I have choosen country code(regulatory-domain-profile) as US and the controller countrycode as IN.
if your case also same please change it to IN.
(Aruba3200) #show ap regulatory-domain-profile default
Regulatory Domain profile "default"
-----------------------------------
Parameter Value
--------- -----
Country Code US
Valid 802.11g channel 1
Valid 802.11g channel 6
Valid 802.11g channel 11
(Aruba3200) #show country
Country:IN
Model:Aruba3200
Hardware:Unrestricted
Hope this will help you on fixing the issue :)
Please feel free to comeback for any furhter assistance.
Cheers,
Venu Puduchery.