Wireless Access

Reply
Contributor I

Enable a controller license in AOS8.5

I upgraded a 7005 controller from AOS 6.4 to AOS 8.5 standalone mode. I can't enable the licenses using the CLI command "license-pool-profile-root" even in the /mm directory. The command is not supported. It works with the GUI but I have lots of controllers and prefer CLI.  I would appreciate any advice on how to use CLI if possible or why it's not possible.

Thanks.

Highlighted
Frequent Contributor II

Re: Enable a controller license in AOS8.5

From the (MM) [mynode]# prompt or if this is a standalone or MCM controller, you should be able to simply add the license by using the following command from the CLI prompt of the MM, standalone, or MCM master.

 

# license add <paste license key here)

 

You can then see the licenses using the following command

(MM) [mynode]# show license

 

I hope this helps,

David
Sr. Trainer and Author of upcoming "Understanding ArubaOS: Version 8.x" book
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: