Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Error after upgrading to Aruba 8.0

This thread has been viewed 0 times

  • 1.  Error after upgrading to Aruba 8.0

    Posted Feb 21, 2019 10:17 AM

    We are in the process of upgrading our Aruba OS from 6.4 to 8.3 and we moved about 10% over for now. I have noticed that we get the following message:

    An internal system error has occurred at file sapd_msg.c function sapd_pwr_report_timer_handler line 9834 error sap

     

    The controller shows the AP down but you can still ping it. It's only happening to the AP-105s. The APs 215,275,315 and 364 are not having this problem. The only way to fix this problem is to reboot the AP. I was wondering if the anybody knows what this error means? 



  • 2.  RE: Error after upgrading to Aruba 8.0

    Posted Feb 22, 2019 11:02 AM

    Does anybody out there have AP-105s connected on their network running 8.3.3?



  • 3.  RE: Error after upgrading to Aruba 8.0

    EMPLOYEE
    Posted Feb 22, 2019 11:27 AM

    What version of 8.3 is this?  A similar bug is fixed in 8.3.0.4 (and 8.3.0.6 is out right now - recommended).



  • 4.  RE: Error after upgrading to Aruba 8.0

    Posted Feb 25, 2019 01:38 PM

    We're running 8.3.0.3



  • 5.  RE: Error after upgrading to Aruba 8.0

    Posted Feb 12, 2020 03:41 AM

    from version 8.4 above or from 8.5 the default credentials are admin/serial number

     

    try to reset the AP and see if that helps