Wireless Access

Reply
Highlighted
Frequent Contributor II

Error after upgrading to Aruba 8.0

We are in the process of upgrading our Aruba OS from 6.4 to 8.3 and we moved about 10% over for now. I have noticed that we get the following message:

An internal system error has occurred at file sapd_msg.c function sapd_pwr_report_timer_handler line 9834 error sap

 

The controller shows the AP down but you can still ping it. It's only happening to the AP-105s. The APs 215,275,315 and 364 are not having this problem. The only way to fix this problem is to reboot the AP. I was wondering if the anybody knows what this error means? 

Highlighted
Frequent Contributor II

Re: Error after upgrading to Aruba 8.0

Does anybody out there have AP-105s connected on their network running 8.3.3?

Highlighted
Guru Elite

Re: Error after upgrading to Aruba 8.0

What version of 8.3 is this?  A similar bug is fixed in 8.3.0.4 (and 8.3.0.6 is out right now - recommended).


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Frequent Contributor II

Re: Error after upgrading to Aruba 8.0

We're running 8.3.0.3

New Contributor

Re: Error after upgrading to Aruba 8.0

from version 8.4 above or from 8.5 the default credentials are admin/serial number

 

try to reset the AP and see if that helps

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: