Error - xSec allowed VLANS are required for xSec Point-to-Point Configuration
08-10-2015 04:44 PM - edited 08-10-2015 04:46 PM
I'm getting the error mentione in the subject when trying to apply any port configuration in the Web UI of a 7005 controller running 22.214.171.124.
This is a controller right out of the box. I've licensed it and put some IPs on it. I was able to get LACP configuration to stick as well. I started on an earlier version and got the error, so I updated to the latest and greatest and still get the same thing.
I don't have an xSec license and the xSec module is disabled, so I don't understand why I'm getting this message.
*I guess it's not an error, because configuration seems to be sticking, but it's annoying since I don't have xSec enabled anywhere. Should I just ignore it?
Re: Error - xSec allowed VLANS are required for xSec Point-to-Point Configuration
08-10-2015 10:54 PM
Open a TAC case to make sure, but you should be able to ignore it. xSec isn't even supported on the 7000 controllers.
Distinguished Technologist, TME