Wireless Access

Reply
Highlighted
Occasional Contributor I

Ethernet setting on IAP 205

Hello,

 

My first post here & my first work with Aruba wireless :)

 

Is there any way to force the speed on an aruba 205 access point's ethernet interface to 100/full. A cisco switch that it connects to is showing lot of errors.
The switch side was already tried changing to auto/hard coded.

Thanks in advance.

Ethernet Duplex/Speed Settings
------------------------------
Autoneg Speed (Mbps) Duplex Iface
------- ------------ ------ -----
on 100 Full bond0


Aruba Operating System Software.
ArubaOS (MODEL: 205), Version 6.4.3.1-4.2.0.0

 


Accepted Solutions
Highlighted
Frequent Contributor I

Re: Ethernet setting on IAP 205

Make sure you click SHOW ADVANCED setting, or you can try using CLI

IAP-Set Port

 

 

-Yopianus Linga-

View solution in original post


All Replies
Highlighted
Contributor I

Re: Ethernet setting on IAP 205

Hi

I understand that you have mobility controler. check this profile:
Configuration --> AP Group --> <AP-Group of the desired AP> -> AP -> Ethernet interface 0 port configuration --> Ethernet interface link profile

Regards
Piotr Filip
------------------------------
ACEX#41/ACMX#536/ACDX#878/ACCX#818/CWNA/CWSP

Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.
Problem Solved? Click "Accepted Solution" in a post.
Highlighted
Occasional Contributor I

Re: Ethernet setting on IAP 205

Hi,

 

I think this is more of an IAP acting as the controller.

Please let me know. Thanks.

Highlighted
Frequent Contributor I

Re: Ethernet setting on IAP 205

Goto "MORE > WIRED"

01.JPG

 

Select ETH0 profile and edit

02.JPG


Set Speed

03.JPG 

 

 

** it will applied to ALL Access Point !!

 

 

-Yopianus Linga-

Highlighted
Occasional Contributor I

Re: Ethernet setting on IAP 205

Thanks, but our IAP does not show that option under wired.

It just has fields till admin status.

 

any other options that i can try please?

 

 

 

Highlighted
Frequent Contributor I

Re: Ethernet setting on IAP 205

some screenshot would be helpful.

 

 

-Yopianus Linga-

Highlighted
Frequent Contributor I

Re: Ethernet setting on IAP 205

Make sure you click SHOW ADVANCED setting, or you can try using CLI

IAP-Set Port

 

 

-Yopianus Linga-

View solution in original post

Highlighted
Occasional Contributor I

Re: Ethernet setting on IAP 205

Thanks much. i got it finally.

Just another query , an IAP-275 is currently acting as the IAP controller role. However, there was another IAP acting as controller earlier, but it seems to be flapping on/off. Is there any way to look in the GUI of IAP to see the flaps & its reason to understand the role changes.

 

Highlighted
Frequent Contributor I

Re: Ethernet setting on IAP 205

I think you should check on the switch logs for that. The main reason IAP changes master/role ussualy because the previous master is down.

 

Try changing the cable or port of the troubled IAP.

 

-Yopianus Linga-

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: