Wireless Access

Reply
Regular Contributor I

Flexradio APs

We've got some AP-203H units with the flexradio wotnot. Does anybody know how to configure these as 2x2 single band APs within a controller?

 

I've had a quick look around and nothing has jumped out at me, but I'm very happy to be pointed towards documentation I've missed.

 

I've tried disabling a radio, and I end up with a single stream AP with one disabled radio, so there's something else that needs to happen. 

Re: Flexradio APs

Are you running them as Instant, AOS 6.5, or AOS 8.2?


Jerrod Howard
Distinguished Technologist, TME
Regular Contributor I

Re: Flexradio APs

AOS on version 6.5.4.0 at the moment.

Aruba

Re: Flexradio APs

The AOS user guide has a section called "Enabling Flexible Radio".

/Onno
Highlighted

Re: Flexradio APs

AOS 8.5.0.0 does not have such section:

 

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=35490

 

Not much info about it

 

Any help?


PS: If you feel this information is useful and solved your question or problem, please do not forget to mark it as a solution and give me some kudos.

Re: Flexradio APs

There's not much to it, the 203 series support flexradios that operate either 2x2 single band or dual-band in 1x1. If you want to define that behavior, within the AP system profile you can elect the flex radio mode as 2.4Ghz only, 2.4Ghz and 5Ghz, or 5Ghz only. Table 112 is where it's at for the UG I have on my laptop

 


Jerrod Howard
Distinguished Technologist, TME
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: