Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Going from 6.3.1.5 to 6.4.2.2

This thread has been viewed 0 times

  • 1.  Going from 6.3.1.5 to 6.4.2.2

    Posted Nov 12, 2014 07:32 AM

    Hi,

     

    i was just planning an upgrade to be able to use the AP-205's.  However i noticed the 6.4 firmwares were not yet in the general availability directory, but in the early deployment?

     

    Am i compromising stability if i install the early deployment?

     

     


    #AP205


  • 2.  RE: Going from 6.3.1.5 to 6.4.2.2
    Best Answer

    EMPLOYEE
    Posted Nov 12, 2014 07:35 AM
    I have quite a few large customers (including hospitals) running 6.4.2.2 without issue.

    It will be GA shortly.


  • 3.  RE: Going from 6.3.1.5 to 6.4.2.2

    Posted Nov 13, 2014 09:22 AM

    Does 6.4.2.2 support mesh with the AC access points?



  • 4.  RE: Going from 6.3.1.5 to 6.4.2.2

    EMPLOYEE
    Posted Nov 13, 2014 09:23 AM

    Mesh is not currently support on 802.11ac access points. 



  • 5.  RE: Going from 6.3.1.5 to 6.4.2.2

    Posted Nov 20, 2014 04:39 AM

    About one week after the upgrade...  No problems detected so far...