Wireless Access

last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Guest traffic using a transparent proxy

This thread has been viewed 0 times

  • 1.  Guest traffic using a transparent proxy

    Posted Mar 11, 2013 03:21 PM
      |   view attached

    Good day,

     

    We need to pass the traffic from the guest users through a transparent proxy (Blue Coat), guest users are getting addresses from the network 172.16.120.0/24 (Vlan 5) and the DHCP server is being handled by the WLAN controller (because it didn’t work when the external DHCP server was deployed with this topology).

     

    The network topology is attached.

     

    As you can see, we enabled a dedicated port (interface GE 1/5) to pass the guess traffic to the Proxy server, but it seems to not be the correct solution. What I guess is that I cannot pass just the traffic of that Vlan for the port, because the user traffic is sent using the GRE tunnel, but propably I'm wrong.

     

    May you please give us advice on how to use the Aruba controller to achieve this?

     

    Thanks in advance.

     

    César



  • 2.  RE: Guest traffic using a transparent proxy

    EMPLOYEE
    Posted Mar 18, 2013 03:04 AM

    What is the default gateway of the guest traffic?