Wireless Access

Reply
Guru Elite

Re: HA fast failover configuration giude


@jgreen wrote:

Just want to confirm - master-master redundancy cannot be used with HA, because in HA mode the APs will establish tunnels to both controllers, and a master that is currently in standby mode will not terminate AP tunnels.  Is that correct?


The solution would be to remove master-master redundancy, make both controllers into standalone masters, and use AirWave to ensure that configuration is kept synchronized.  Correct?


Supported, but....

"

 

Essentially, you end up pointing everything at the VRRP, so...

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Highlighted
Occasional Contributor II

Re: HA fast failover configuration giude

My issue has been solved. I just put all port channel in trusted.

Occasional Contributor II

Re: HA fast failover configuration giude

Can controller master and standby is mix model? but It's same version

MVP Guru

Re: HA fast failover configuration giude

Yes

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: