Wireless Access

Reply
Highlighted
New Contributor

HPE 1920-8G-PoE+ (180W) Switch how to enable?

Switch HPE 1920-8G-PoE+ (180W)
I want to change the time value. ex) >en #conf t #(conf t) time 01/30/2019 19:00:00

But not enabled(en) and the cli command is limited. What are some ways to change?

 

<Switch>

?

initialize 
ipsetup 
password 
ping 
quit 
reboot 
summary 
telnet 
upgrade 

 

<Switch>summary

 

Current boot app is: flash:/jg922a-cmw520-r1115.bin
Next main boot app is: flash:/jg922a-cmw520-r1115.bin
Next backup boot app is: flash:/jg922a-cmw520-r1115_bak.bin

HPE Comware Platform Software
Comware Software, Version 5.20.99, Release 1115
Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LP
HPE 1920-8G-PoE+ (180W) Switch uptime is 8 weeks, 4 days, 1 hour, 23 minutes

HPE 1920-8G-PoE+ (180W) Switch
128M bytes DRAM
32M bytes Flash Memory
Config Register points to Flash

Hardware Version is REV.A
Bootrom Version is 117
[SubSlot 0] 8GE+2SFP Hardware Version is REV.A

MVP Expert

Re: HPE 1920-8G-PoE+ (180W) Switch how to enable?

Try the following

_cmdline-mode on
All commands can be displayed and executed. Continue? [Y/N] Y
Please input password: 512900
system-view 

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: